//MENACE'S CONFIG v1.7a
Major addition and changes. 

I tried to remove all custom settings so that the config.cfg will shape after your normal half-life settings. you now will have your normal half-life sensitivity,rate,and vid settings when you follow the installation guide below.

_________________
Table of Contents
-----------------
1 Installation *VERY IMPORTANT*
-----------------
2 Config info  *EQUAL IMPORTANCE!*
-----------------
3 Class Descriptions
-----------------
4 Communication notes - good idea if you are confused by my weird yet GREAT say_team system
-----------------
5 Config Notes
_________________


1___________
Installation|
____________|

Before preceding read Section 2 if you want to use keys other than the ones specified in first.cfg

PRESTEP This is soo important that i had to put it up here
**Add -zone 2000 to your command line THIS IS REALLY IMPORTANT!!! Don't complain to me if your game is crashing a lot if you dont add this.**

-1st- extract to the dir that you have half-life in (i.e. if its c:\sierra\half-life\tfc you would extract to C:\sierra (Backup your autoexec.cfg and config.cfg)
there will be 2 folders in the dir you extract to

leftieconfig

rightieconfig

those are the sets of configs for either handed you play as take the files in the folder of your choosing and

copy them into your \TFC folder.

You can delete the leftieconfig and rightieconfig folders after you have done that.

-2nd- run tfc, make sure your video, sound and other settings are correct. Also take note of the note (redundent?) below in the sniper script info.
Once that is done type this in console 

exec first.cfg 

you only need to exec that script once. after your config is read only it doesnt matter anymore its just to get the IMPORTANT settings setup for your first run.

then exit tfc

-3rd- go into the config.cfg and add this to the end ;

exec autoexec.cfg

-4th- Make the config.cfg read-only by right clicking on it and going to its properties, check the read-only tab.
	WHY READ ONLY? it makes the config a lot simpler to use. first off it keeps the communication binds set to the default 2fort setup, since there are a lot of 2fort clones, you will have your communication set for them already. second the autoexec.cfg doesnt seem to always execute. if you do step 3, then it will always. Things like the grenade alias work better.(see the bottom of this doc.) you will always have it set to do the same thing. i hate it when i jump in and press the key to switch to grenade 2 but its already on grenade 2 and switches to grenade 1. Or even worse i go to throw a normal grenade as a spy to destroy an enemy sentry and i end up throwing a grenade 2.. not cool! So basically this set is a personal prefference but honestly i was skeptical at first "Read only! no way i cant change my binds in the game" well i tell ya friend i dont miss it that much. if i need something changed i do it in windows. Also another nice side note is friends cant fuck up your controls eheheh they can even make a script that has their custom settings and exec it when they use your game!


-5th- ENJOY YA TFC!


2__________
CONFIG INFO|
___________|


First time users remember i have a built in help menu
Press ";" and you will see this in the upper left corner of the screen

Press 1 for help on keys f1-f12
Press 2 for help on keys A-Z
Press 3 for help on other keys
Menace Script v1.4 menace@danyi.com

Simple as that!

GRENADE TOGGLE/CONFIG INFO

the grenade script is really a cool one. Press ' to select grenade 1 or grenade 2 (you will know which one you have selected trust me :)
then press the prime key (mouse3 if you dont have mouse3 then go in the switch.cfg and change all of the mouse3 to mouse2 or whatever you want) wait for the correct time (listen to the cool timer wav)
then press the prime key again and throw. great for making em explode in peoples faces hehe.


The big change came to me from a friend.. great idea too. i made a right handed script set.

The grenade script is also updated for this and is bound to w by default. it can be moved to e if you choose to use the w,a,s,d setup. simply change the bind in first.cfg from "switchw" to "switche" if you want to make it a different key than either of those. look at the switch.cfg file, there is more info in there.

NOTE The keys can be change, the keys w,a,s,d can be used for movement keys with some minor changes. simply change the move keys to w,a,s,d and move the reload,use,and special keys to e,d, or f.
then go into the class configs. anywhere you see "bind a" change that to a key that suits your preference. if you have any further troubles please contact me at menace@danyi.com

_______________________________________________________________________
             SETTINGS AND BASIC KEY BINDS

Normal config (mine)   Right handed configs
________________________________________________________________________
movement keys:         
left arrow             S
right arrow            F
up arrow               E
down arrow             D

Use key:
ins                    Q

Reload key:
Del                    R

Special key:
Enter                  A

Discard key:
A                      Enter

Jump key:
Shift                  Space

Grenade toggle         
'                      w (can be moved to e)

_______________________________________________________________________

The arrow keys become;

 "UPARROW" "say_team WE NEED MORE OFFENSE."
 "DOWNARROW" "say_team WE NEED MORE DEFENSE."
 "LEFTARROW" "say_team RECOVER FLAG A.S.A.P.!!"
 "RIGHTARROW" "say_team Cap Da Flag/Prevent Enemy From Caping ours!"


3_________________
CLASS DISCRIPTIONS|
__________________|


//Scout

Enter - drop caltrops
mouse2 - hold to do a conc jump

//Sniper

SNIPER SCRIPT INFO
The "sensetting" alias has been moved to the autoexec.cfg and has been included in all the class configs. this way if you are zoomed as a sniper and die, then change classes, it will restore your default sensitivity. simply change it in your autoexec.cfg its the first alias listed in it.
HOME=zoom level
its set to 20 by default.
first press = fov 10 when zoomed
second press = fov 20 when zoomed
third press = fov 30 when zoomed
forth press = fov 40 when zoomed
[ - Changes m_filter setting, when zoomed this can make it easier to hit that one place you cant get the mouse to go over.
] - resets m_filter to 3.
enter - quick switch and fire of autorife. Hold it to fire autorifle, when release will switch you back to last weapon
mouse2 - zoom in/out (note if you die and respawn and your sensitivity is still at the zoom sensitvity level , press mouse2 and it will reset to your default sensitivity.

//Soldier

enter - Rocket Jump
mouse2 - reload
[ - say_team Im on it
] - say_team Forming attack party at-
those are great for arranging offense and defense

//Spy

enter - notify team of what you are disguised as and tells them to stop shooting you :)
[ - Disguise to blue team
] - Disguise to red team
after you choose a team the keys become
[ select disguise (class)
] go undercover as selected class
i.e.
[(for blue team),[ twice to select sniper,] to make change to sniper.

mouse2 - pull out knife
home - feign


//Demoman

enter - hold and it shoots pipe bombs till you release it, when release dets pips and switches back to last weapon.
[ - drops detpack
] - selects timer on detpack
mouse2 - detpipes

//Engineer

enter - build menu
mouse2 - det dispenser
[ - build sentry
] - say_team Sentry Gun up at- (note can press f6 (*enemy*) and say "enemy sentry gun up at-")
home - engineer key. Press once and it will build you a sentry gun. get more ammo/armor and press it again, it will build a dispenser, walk up to your sentry or anyone elses with your tool out (that sound gross) and it will try to upgrade,refill,or repair the gun.

//Hwguy

enter - takes out AutoCannon
mouse2 - Hold to pull out AC and fire, when released it stops firing and switches you back to your last weapon
[ - throws a handgrenade
] - throws a spamgrenade

//Medic

enter - takes out biothang
mouse2 - hold to use biothang, release to go back to last weapon
[ - say_team Im a medic at- (good to get the sick near you to heal them)
] - say_team -come here or tell me your location and i will get there asap to heal you. 
(use after [ )
i.e. "Im a medic at- Our Team's Ramp Room -come here or tell me your location and i will get there asap to heal you."

//Pyro
Same as Hwguy
(note this is actually a good class with this script, take out the cannon then attack, if someone get near you hold mouse2 and cook em with the flamethrower!)


4__________________
Communication notes|
___________________|


the communication system is made up of prefixes and suffixes. here is an example

f1=ENEMY INCOMING AT-
f2=BACKUP NEEDED AT-
f5=Our Team's-
f6=Enemy's-
O=sniper nest
p=spiral

the combinations can be used in many different ways.

ENEMY INCOMING AT-
OUR team's-
Sniper nest

Backup needed at-
enemy's-
spiral-


5___________
Config notes|
____________|

Thanx to all the other scripters out there like Corpo, a lot of this script was based on that one.

NOW GO PLAY YA NUMBSKULL!

MENACE-TOMB?-
menace@danyi.com




